產品展示PRODUCTS
纜接到螺釘端子上。 由于WM1模塊是對稱回In this manner, the end of the cable is directly connected to a mechanical spreadTerminal switches from the electric TURCKWAK4-5-WAS4/P00,TURCK旋轉編碼器
更新時間：2025-06-01
訪問量：2791
廠商性質：經銷商
WAK4-5-WAS4/P00,TURCK旋轉編碼器
這種方式中，散開的電纜末端直接連接到機械
開關的端子上，來自TURCK信號處理器的電
signal processor
Cable connected to the screw terminals.
Because the module is symmetrical back WM1
Road, all at the input side and the output
side is no different.
WM1 internal circuit composed of only a
few resistors, and these
Resistance in accordance with EN 60070-14 (DIN VDE 0165-1)
No authentication standard classification
WAK4-5-WAS4/P00,TURCK旋轉編碼器
of simple electrical equipment. therefore
■ When the input circuit monitoring func
tion effectively, need to contact the
Then the shunt resistor module
■ screw terminals to 2.5mm
路，所有安裝在輸入側和輸出側沒有區別。
WM1的內部電路僅由一些電阻構成，而且這些
電阻是按照EN 60070-14（DIN VDE 0165-1）
標準分類的不需要認證的簡單電器設備。 因此
■ 當輸入回路監控功能有效時，需在觸點上
WAK4-5-WAS4/P00,
銷售部